軸承作為現代工業的基礎，在一些高精行業我國對進口軸承如（skf軸承，nsk軸承，ntn軸承,fag軸承，timken軸承)的需求旺盛前景看好．因此在使用過程中首先面臨將是軸承的安裝與調試，如安裝不當將給客戶造成不可估量的損失．在此駿馳精工軸承幫您分析下進口軸承常用的安裝方法．

 

　　Bearings as the foundation of modern industry, in some high-precision industries, China's imported bearings such as (skf bearings, NSK bearings, NTN bearings, fag bearings, Timken bearings) strong demand prospects. Here, Chun Chi Seiko bearing helps you analyze the common installation methods of imported bearings.

 

　　預防16％軸承過早失效現象（Preventing premature failure of 16% bearings）

 

　　在所有軸承過早失效的情況中，大約16％是由于安裝不當或使用不正確的安裝方法而引起的。 各種應用場合可能需要用機械、加熱或液壓安裝方法來正確而高效地安裝軸承。 選擇適合應用場合的安裝方法將幫助您延長軸承’的使用壽命，并減少因軸承過早失效和對應用場合造成潛在損害而帶來的成本。

 

　　In all cases of premature failure of bearings, about 16% are due to improper installation or incorrect installation methods. Mechanical, heating, or hydraulic mounting methods may be required for the correct and efficient mounting of bearings in various applications. Choosing suitable installation methods will help you to extend the life of the bearing and reduce the cost of premature bearing failure and potential damage to the application.

 

　　軸承冷安裝（Cold installation of bearings）

 

　　中小型軸承一般采用冷安裝。 傳統上，軸承是用錘子和一段舊管子安裝的。 這一做法可導致外力經過滾動部件傳遞，從而損壞滾道。 SKF安裝工具將外力施加于采用壓配合的軸承圈，有助于防止軸承損壞。

 

　　Small and medium-sized bearings are generally cold installed. Traditionally, bearings are installed with hammers and a section of old pipes. This method can cause external forces to pass through the rolling parts, thus damaging raceway. The SKF installation tool applies external force to the bearing ring with pressure fit, which helps prevent bearing damage.

 

　　軸承熱安裝（Bearing hot installation）

 

　　安裝前，通常用油浴加熱軸承。 但是，這種方法可能會污染軸承，導致軸承過早失效。 如今，感應加熱是加熱軸承最常用的手段，這是因為其控制性、效率和安全性都很高。 SKF集團確立了用于軸承應用的感應加熱器研發標準。 SKF軸承感應加熱器具備許多功能，有助于預防在加熱過程中損壞軸承。

 

　　Before installation, usually oil bath is used to heat the bearing. However, this method may pollute the bearing and cause premature bearing failure. Today, induction heating is the most commonly used means of heating bearings, because of its high control, efficiency and safety. SKF group has set up R & D standards for induction heaters for bearing applications. The SKF bearing induction heater has many functions to prevent damage to bearings during heating.

 

　　用液壓技術安裝軸承（Installing bearings with hydraulic technology）

 

　　SKF是在軸承安裝中使用液壓技術的先驅，這些技術包括SKF注油法和SKF驅緊安裝法。 這些方法能幫助簡化軸承配置，有助于正確而簡便地安裝軸承。 SKF還開發了品種繁多的工具和設備，使這些液壓技術付諸實施。

 

　　SKF is a pioneer in the use of hydraulic technology in bearing installation, including SKF injection method and SKF drive installation method. These methods can help simplify the bearing configuration and help to install bearings correctly and simply. SKF has also developed a wide variety of tools and equipment to enable these hydraulic technologies to be put into practice.

 

　　在線安裝和拆卸說明（online installation and removal instructions）

 

　　SKF提供一項獨特的網上–服務，用八個語種免費提供安裝和拆卸SKF軸承和軸承座的信息服務。 該信息服務提供有關安裝或拆卸的分步說明。 該系統還提供有關選擇正確工具和潤滑劑的信息。 有了這一免費的網絡服務，無論何時何地，SKF的專業知識盡在您的指尖。

 

　　SKF provides a unique online-service that provides free information in eight languages on the installation and removal of SKF bearings and bearing seats. The information service provides step-by-step instructions for installation or removal. The system also provides information about selecting the right tools and lubricants. With this free network service, SKF's professional knowledge is at your fingertips wherever and whenever.